Press both tabs inward and hold while gently lifting the separator roller cover to the open position. Tray 1 Paper Sets the type of paper loaded in the standard sheet tray. Hold the tray with both hands, lift the front slightly and remove it from the printer. Align the toner cartridge with the corresponding cartridge carrier in the printer and insert it. Push the clips on both sides of the slot outward. AppleTalk Printer Specifies the printer name in the AppleTalk network up to 32 alphanumeric characters and symbol sets. Connecting the Printer to the Network To attach the printer to a network:

Uploader: Nenos
Date Added: 7 September 2015
File Size: 45.10 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 54711
Price: Free* [*Free Regsitration Required]

Page Up to 12 single-byte characters 51100cn 0x20 to 0x7E, except 0x20 ” ” blank and 0x3A”: Does not adjust the registration automatically. In addition to the toner level indicator that appears each time you send a job laset print, a message appears on Dell cn Specification Sheet 2 pages. Page Align the arrow marks on the transfer roller to the marks on the printer, and gently push the roller into the printer. It prints according to the length and width specified by the lpadmin command.

Prints text and graphics parallel to the short edge of the paper. Type Tray 4 Paper Sets pfl6 type of paper loaded in the optional sheet module.


Page Select whether you want this printer to be the default printer for the client, and then click Finish For Windows XP, click Next, and then click Finish. Long Assumes binding along the lsser edge of the page left edge for portrait orientation and top edge Edge for landscape orientation. Tray 3 Paper Sets the type of paper loaded in the optional sheet module. Slowly, completely remove the tray from the printer. User name Host name Date and time Before Installation The following are required for the installation.

Page 60 Remove the protective cover from the imaging drum.

However, if you use one of the Microsoft methods, you will not have all of the features, such as the status monitor and other printer utilities, that are installed with the Drivers and Utilities CD. Page Select Network and Internet. The typefaces you select add personality to a document. Align the two protrusions pccl6 the holes on the controller card, and then tighten the two screws from the back side of the controller card.

Installing the New Fuser Unpack a new fuser, grip the fuser by the handles, align it with the slots in the printer, and slowly push it in. Researchers find way to track ‘untraceable’ 3D-printed guns The 3D-printer leaves a hardware fingerprint. Page Dell Color Laser Printer cn postio If this cilor not Restart Printer to printer problems.


There are four types of supported compression formats. Close Front Door Printer cover is open. Change the imaging 5110cn. The default is 0.

Dell 5110cn – Color Laser Printer User Manual

Prints in the black and white mode. When your operating system is earlier than Windowscreate settings according to the manual 5110c the wireless setting tool provided by your wireless device manufacturer.

In these cases, before you start printing, set queue you want to print to as the default queue. If your computer provides a wireless LAN adapter tool, change the wireless settings using this tool. Page At this point, Plug and Play is activate automatically and installs the printer.

Dell cn Color Laser Printer Overview – CNET

Never throw a used imaging drum into a fire. Does not limit access to the menus. Disables the Hex Dump feature. If the Plug and Play is not activate, click Install. Push the side button and open the outer front cover.

Author: admin