It would also be very coincidental since it happened once you reinstalled Windows. Readers who want to disseminate information on the nForce2 from the RME Forum can read more at rme-audio. To verify that memory modules work without errors you can run Memtest86 before you install the OS. If you are not using onboard audio and midi IRQ 10 by default you can free up irq positions by disabling these resources. To cut the bridge you can preferably use a razor or X-acto knife. You can test that you’ve cut sufficiently deep by using an ohm meter or by testing if the CPU boots with default settings loaded to a MHz FSB, if so you’re done – if not, cut a little deeper.
|Date Added:||19 January 2013|
|File Size:||58.62 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
A7N8X deluxe sound problem
It would also be very coincidental since it happened aaudio you reinstalled Windows. The yellow arrow indicates the location of the bridge to cut.
Your memory now have to comply with a7nx8 higher FSB speed and you should preferably add a heat sink to the Northbridge to deal with raised chipset temperature. The beta patch can be downloaded from here.
Take a moment to think of the variety of things which would make a speaker-out jack not work on a working sound card A fine copper wire is attached as a bridge in the marked holes as to get access to the lower multiplier settings. The Ass NF7- S revision 1. There have been various reports of problems with the 3COM interface not operating reliably at Mbit speed 10 Mbit seems to work. Hello and welcome to Techspot. What you have said doesn’t make much sense and that’s what makes this a very bizzare problem to troubleshoot.
I was doing some maintenance on my htpc last night. Add your comment to this article You need to be a member to leave a comment. So i read through the boards here and no one seemed to have a solution.
A7N8X deluxe sound problem – TechSpot Forums
You must log in or sign up to reply here. I only got sound during boot up from the motherboard saying something like post successful now booting into operating system.
Ohh, a completely rediculous idea, but if you get bored try disconnecting your front panel headers completely. The approach used is illustrated by a snapshot from the “Test 1” design:. CPU Vcore Voltage menu.
A7N8X Deluxe | ASUS Global
Readers who may want to get in dialogue with the author e. The Norwegian site, www. Corsair memory compatibility and recommended parts numbers are found here. I really can’t think of anything unless the information you have provided is somehow incorrect or not complete.
You can motherboarx save, exit BIOS and re-boot.
You can test that you’ve cut sufficiently deep by using an ohm meter or by testing if the CPU boots with default settings loaded to a MHz FSB, if so you’re done – if not, cut a little deeper. Hopefully someone who knows more about your situation will post and help you out.
You don’t need to cut very deeply as the wires are just below the substrate surface. This is a simple operation and actually won’t take very long – but remember to be careful while you do it so not other bridges are being damaged. The Interrupt mothwrboard table has the following outlook:. The reason I ask is because I have never been able to record sound without interference if at all. The one L12 bridge to be cut is illustrated in this picture:.
ASUS A7N8X – motherboard – ATX – Socket A – nForce2 SPP
The following steps describe the procedure discussed in more detail at Amdmb. To get the latest users’ experiences on memory compatibility crosscheck your information with nForce2 forums on the Internet – this link provides good information. At least some motherboards with onboard sound can only output to the back or the front but mothefboard both.
If you’re only interested in MHz, you can choose the “Optimal” option. Beware that this modification will void motherbkard warranty on the CPU!