Make a backup copy of the driver. I hope it helps you. Be careful with 32 bit or 64 bit version however. Posted on Nov 29, Be the first to answer. OrientationSet portrait or landscape. Insert the ribbon roll into the supply holder. Clean the print head.

Uploader: Kazigar
Date Added: 15 February 2005
File Size: 17.83 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 23150
Price: Free* [*Free Regsitration Required]

Answered on May 06, It will download and install it automatically using internet. TroubleshootingCreate a custom sizeNormally, when the printer is in not working properly, the “Power”LED blinks continuously; while printing and communicationbetween the host and printer stops.

Argox OS plus User Manual | Page 21 / 41

Check if the printer power is turned on. Please refer to Appendix I. Appendix II – Installing the Cutter1. Press and hold the feed button while turning on the power,until the printing motor is activated. Posted on Argoc 26, Be the first to answer.

Tell us what’s missing. Check if the communication cable parallel or serial isconnected securely to your parallel or drr200 port on thePC and to the connector on the printer at the other end.

Guide the shaft through the respective holes on the leftbracket, the white roller and then the right bracket in order. Pleaserefer to Appendix I. Lead the backing paper over the dispenser bar, thenthread it back into the slot between the dispenser bar andH cover, ensuring that it is inserted between the whiteplastic roller and platen roller.


Your manual failed to upload Ask a Question Usually answered in minutes! Push arvox print head firmly into the casing and shift it to theleft. The printer driver needs to install version 1.

Value Line Drivers and Software (Argox)

Press the “Feed” button for 10 seconds, and the “Ready”indicator and “Power” indicator will go off in order. For dpi modes with 4inches print width, youshould select LabelDr. Answer questions, earn points and help others Answer questions. Dr20 mode peels backing material away from the labelas it prints.

Drivers for argox dr.200 windows 7 – Argox OS-203 Thermal Label Printer

Dr2200 careful not to touch the printhead elements. You can’t post conmments that contain an email address. Page 36 The simplest way to connect to other hosts not PC compatible orterminals is: I am upgrading to a computer with Windows 7.

Answer questions, earn points and help others Answer questions.

The simplest way to connect to other hosts not PC compatible orterminals is: Thread the media over the platen roller, then route themedia through the slot of the cutter module. With this driver you canrun any popular Windows software applications such as MS-Wordand print to this printer.


I hope it helps you.

This unit was tes ted with shielded cables on the peripheral devices. Hi If you are using original windows 7, just go to start menu and choose windows update to get the latest modem driver for your computer.

Always switch off the power before cleaning.

Driver Argox Label Dr – exeevil

Press down the print head module firmly. In the Printers menu: Disconnect the print head cable.

Unwrap the ribbon roll pack and separate the ribbon rolland the bare core.

Author: admin